The Importance Of Process Oven In The Processing Of Mahogany Furniture

Oven is one of the stages in the processing of mahogany furniture. Oven itself is often known as a dryer, so that in the processing of mahogany furniture, oven serves as a means to dry the wood as raw material.

To make the process of the oven mahogany furniture, the oven must be provided a special room, which can be flowed through the steam pipe. Steam was the result of using fire in the engine boiler. To produce heat, normally used sawmill waste wood as fuel. In addition to wood, coal can also be used for producing heat.

Process carried out during the first week of the oven, with heat used was 80 ° C. heat that must be stable, so that even distribution of steam in the oven space can be done. So that it can obtain optimal dryness. Because heat must be stable so that the steam control equipment installed on the boiler which is equipped with a siren. You could be setting it on the degree that, if the heat is less than 80 ° C then the sirens would go off, that’s the sign you need to add fuel, so the heat can reach 80 ° C again.

Dryness to be achieved in the process of the oven is 9. Because of drought in this figure is optimal in the timber. In this drought pests or wood destroying insects can be destroyed. Because the steam is absorbed by the wood pores.